Спасибо всем! Я очень рад что вам нравится модель.

@matvei_bogdanov
Модель сделан по заказу и я отправлю его из Сербий в Казахстан. В транспорте много частей можно сломатся и потому я не клею их.
Извините, я не говорю по русскии хорошо.

@kent
Thanks. I use airbrush for all fading, just take lighter colour than base and make some freehand fading. Later I use paper or masking tape and place on some panel lines to make sharp colour transitions from base to lighter colour. It`s basically same like Mig Jimenez does on his AFV Modulation techniques video.

Looks GREAT, SukhoiSRB! As always!) Have you used salt method?

Thanks!
No, i haven`t used it, just a lot of experimenting with my airbrush and different tones of gray.

Я не смог прочитать описание! Но только 1 вопрос??? Почему ракеты и т.б лежит рядом а не на пилонах? По покраске просто супер мне далеко до такого. Приятно смотреть.

Не говорю по русски хорошо, потому описание написал по англиский.
Модел сделал по заказу и ракеты нет на пилонах потому что модель нужно отправить почтой.

Model is made on order and i couldn`t place weapons and fuel tanks because they would break during transport.
Other than that, it`s made to be "in flight" so landing gear is not lowered )

@sergei
I made scratches with thin brush

Thanks for comments
Well, there weren`t any pilots with the model
As for fact it is clean, theese F-15s were rehauled and repainted in mod eagle scheme, here are pictures of real planes, notice how clean they are

@phantom
Yes it is
I had to leave some parts separated because it was made by request so i want to prevent any damage during transport in mail.

@snitok
It will be hanging for ceiling i believe when it arrives to new owner

First they invented stealth airplanes, now stealth pilots )

Well i think Serbs can understand Russian easier than Russians can understand Serbs at least that`s how i feel when i listen something in Russian because i recognize some words that are similar in Croatian but sound different in Serbian

I doubt anyone would understand if i wrote in Serbian

Thanks
Well, back in SFRY air force was very well maintained and planes were often really clean and in great shape
http://cdn-www.airliners.net/aviation-photos/photos/4/5/0/0592054.jpg

Unfortunately nowadays after wars and all budget cuts that military took, not all planes are in such great condition

I fixed landing gear meanwhile

I don`t know this is my frist WW2 plane in 1/48 and first Fw-190 i haven`t build others

Well, i got couple of comments like that before, how do you want me to take pictures of model? Bigger in size or?
Thanks by the way

@kent
What do you have in mind as improvements?

Thanks guys
@kent
I havent used any aftermarket, its all out of box

Yes, there are couple mistakes, i made this for a friend and he just wanted to get a "good for the eye" look of the tank.
By the way, i can write in Russian with google translate but it looks very bad and inaccurate so i think its better to write in english.

Aleksei tu parles francais?

I got it from a friend of mine, i dont know where he found it

Its very old kit, not in production anymore. Zvezda bought license for it and is making basically the same model but under their name.

@tihon & alex
Yes, in Serbia. It is MiG-29 that is in active service within Serbian air force. I took opportnutiy to take pictures on airshow

@kedroff
Yes, thats true story unfortunately, that is such shame and disgrace to Serbian goverment

Milenko stays in hearts of all Serbs as a true hero though and will be such forever

@gudzon
I don`t understand why you get it so personal. You said you don`t like my ship and that`s ok, but why keep commenting?
Anyway, i do lack experience in this area and it`s quite different than making a tank or airplane.
You can`t use putty on joint of superstructure and deck since when you try to sand it deck details would completely destroyed.
On the other hand that Trumpeter model isn`t really Tamiya where it all fits without problem, there were a lot of problems with part fitting.
And in the end i dont know if you ever built ship in 1/700, if you did you would know it`s pretty small and hard to work with, although Kirov is ~40cm in length it`s details are very small on some parts.
As i said i will make ships in 1/350 and then i will pay atention to every single details.

Thank you for information
I saw your model of Kiev and i`m really impressed, i dont think i`ve seen any better model in 1/700 scale!
Which photo etch set have you used for that model?

I will add propellers later, same as on Varyag.
Evey other mistakes, same as on Varyag, still lack of experience in this area of modelism and fact its 1/700 scale but i hope i`ll improve with time on 1/350

I havent done rigging since its too small in 1/700 and i dont have tools for something like that. In 1/350 i will do it of course.
Many small antennas are missing since i used one PE set for both ships (my budget is limited unfortunately)
I will add propellers later,i have to find good colour to paint them first
Waterline is to big but again it`s really hard in 1/700 to get it better.

Anyway thanks for noticing all errors, i will do my best to fix that in 1/350!

I was in a rush to finish model for competition so thats why there is no armament. I will add it later.

@vadim
One is single and other is two seater.
No particular reason why i made them with same cammouflage, i just really like that pattern

@pepereina
Well, there where some other good models too, it shared 1st place with one other
I took me 3 months exatcly to finish both single and two seater.

@pepereina
Thanks
I tried to keep them clean, only a bit of weathering and few paint scratches, nothing more
I will probably add some more dust to tracks though, i was in a rush to finish them for a competition